If there’s no depth data in your area or if you want to plot your own route, then you can use Argo’s manual routing option. If you want Argo to create a route for you, use autoroute.

manual home

1. Press the Routing Button Autoroute Icon

Found in the top menu next to Search. You can also tap any place on the map and then choose “Create Route” Take Voyage Icon from the place preview screen.

Note: If there is no depth data in your area you will get an error message if you are in autoroute mode .

1. Press the Routing Button Autoroute Icon

Found in the top menu next to Search. You can also tap any place on the map and then choose “Create Route” Take Voyage Icon from the place preview screen.

Note: If there is no depth data in your area you will get an error message if you are in autoroute mode .

manual home

2. Switch to Manual Routing Mode

In the bottom left corner there is a toggle with options and . Make sure that the option with the “M” is toggled on (colored blue).

The app will remain in the mode last used, but you can change it at any time. Learn more about autoroute mode here.

manual mode

manual mode

2. Switch to Manual Routing Mode

In the bottom left corner there is a toggle with options and . Make sure that the option with the “M” is toggled on (colored blue). The app will remain in the mode last used, but you can change it at any time.

If you want to use autoroute, choose the . Learn more about autorouting here.

manual confirm location

3. Add Your Start Point

Set your start point by tapping the desired location on the map. You can also tap the input field up top to search for a place, use your Port of Origin or use one of your Favorites. Tap “Confirm Location” after you’ve set your start point.

You can also optionally set your end point at this time using the destination input field.

3. Add Your Start Point

Set your start point by tapping the desired location on the map. You can also tap the input field up top to search for a place, use your Port of Origin or use one of your Favorites. Tap “Confirm Location” after you’ve set your start point.

You can also optionally set your end point at this time using the second input field.

manual confirm location

manual add points

4. Add Additional Points

Tap the map to add points to your route.

4. Add Additional Points

Tap the map to add points to your route.

manual add points

manual remove points

5. Remove Points

If you want to remove a point tap the icon in the bottom left-hand corner. You can only remove one point at a time, starting with the most recently added point.

To remove all of the points tap the icon.

5. Remove Points

If you want to remove a point tap the icon in the bottom left-hand corner. You can only remove one point at a time, starting with the most recently added point.

To remove all of the points tap the icon.

manual remove points

6. Complete the Route

Once you’ve added all the points press “Complete Route.” If you did not manually set your end point, Argo will use your last point as an end point.

manual remove points

6. Complete the Route

Once you’ve added all the points press “Complete Route.” If you did not manually set your end point, Argo will use your last point as an end point.

manual complete route

7. Save the Route

If you don’t want to take a voyage right now, you can save the route to your Captain’s Log to take later. Press the “Save” button, add a title and a description for the route, then it’ll be added to your Captain’s Log.

7. Save the Route

If you don’t want to take a voyage right now, you can save the route to your Captain’s Log to take later. Press the “Save” button, add a title and a description for the route, then it’ll be added to your Captain’s Log.

manual start voyage

8. Start the Voyage

If you want to take the voyage, press Start Voyage Button. For more details on taking a voyage check out the Voyage tutorial. If you don’t want to save the route to your Captain’s Log, tap the back arrow in the upper left to go back to the Home screen.

8. Start the Voyage

If you want to take the voyage, press Start Voyage Button. For more details on taking a voyage check out the Voyage tutorial. If you don’t want to save the route to your Captain’s Log, tap the back arrow in the upper left to go back to the Home screen.

manual start voyage